First you must call the monitoring station to put your account on test. Once on test you will put in your code to arm the 

system then once the alarm is armed you will open all doors and windows, walk pass motions etc. Note you must let the alarm 

go off at least 2 to 3 minutes then put in your code to disarm. After this is done you call the monitoring station and verify 

all what signals were received.

Yes, you can contact our office.

Yes, we have the capability of getting you access to view your cameras on your phone

Yes, we are licensed by the state to inspect both system types and more.

P: Pull
After you’ve removed the fire extinguisher from its wall holding, the first thing you’ll want to do is to pull the pin.

A: Aim
Once you’re holding the extinguisher with the pin removed, aim the nozzle at the base of the fire.

S: Squeeze
When you’re ready, squeeze the handle of the extinguisher to begin tackling the fire.
Remember where to aim the suppressant (the base of the fire) and how far back from the fire you should be (5-12 feet).

S: Sweep
As you aim the extinguisher at the fire and squeeze the handle, you should sweep the extinguisher from side to side.